Railway applications. Wheelsets and bogies. Wheelsets. Product requirementsWhat is BS EN 13260 about? BS EN 13260 specifies the characteristics of wheelsets for all track gauges. The requirements defined in BS EN 13260 apply to cylindrical wheel seats. Most of the requirements also apply to wheelsets with conical wheel seats. Specific requirements for conical wheel seats (e. g., press fitting curves, geometric dimensions0.) are defined in the technical specification. NOTE: BS EN 13260 applies to heavy railway vehicles but

BS EN 12081 reflects the typical performance of

2 software and networks

which is used to orient and limit the relative position between the connector and the component to which it is mated

Analytical procedures that utilize dissolution of the coating

The use of the shear resistance test will allow the determination of any change in properties together with an indication of any migrational or interfacial long-term incompatibility between the adherents

Zearalenone (ZEN) in the tested range of 30 μg/kg to 600 μg/kg

Non-substitution measurements on CMMs are also covered

(previously ISO 26722)

Who is BS EN 2715 - Macrographic examination for

Marine engineers

7/8 in British Standard Fine (BSF)

If there are different producers or production processes