1-Wire Chain-able Temp Sensor No Connectors (DS28EA00)Contact for volume pricing or to place special orders Chain able Temp Sensor (DS28EA00) 30 inches in length. Cable comes to a 'Y' configuration at the end with pre configured wiring to allow easy chain installation of the temp sensors. Side 1 To Previous Sensor Yellow Connects to Purple of previous sensor in chain Short to ground for first sensor in chain Black Ground White 1 Wire Data Side 2 To Next Sensor Purple Connects to Yellow of next sensor in

Click the Application Guide for more information on the HTD-009 product

Click the Application Guide for more information on the HTD-010 product

but all 9 pins are connected between the j1939 9-pin connectors

Pre-Defined: The card comes with a pre-defined 10-digit ID programmed to the card

14-pin RP1226 connector (Freightliner & International) to 16-pin dual row connector for CalAmp LMU3640/Veosphere devices

22AWG wire for signal lines and 20AWG wire for power and ground

Cable is 2 meters in length with 4 connections populated

Chain-able Temp Sensor (DS28EA00) 30 inches in length

and sends the ID to a UART/TTL Serial output

but all 9 connections are populated on the j1939 passthru

Cable provides three 9-pin j1939 Type 1 connectors that allow a device to be connected to the vehicle

The Universal OBD part of the cable is 1 ft